[WarpCast] Free EAGLE OS/2 Layout Software - 6/27/98 |
Sponsored by BMT Micro
Java 1.1.6 and OS/2 Warp Fixpaks on CD-ROM
http://www.bmtmicro.com/catalog/0cds.html
--------------------------- WarpCast -------------------------
Source: Adrian Gschwend (ktk@netlabs.org)
Moderator: Trevor Smith (editor@os2ezine.com)
----------------------------------------------
Cadsoft has released a free key for use with the well known EAGLE
layout software.
The following limitations apply to the EAGLE Light Edition in
general:
- The useable board area is limited to 100 x 80 mm (4 x 3.2
inches).
- Only two signal layers can be used (Top and Bottom).
- The schematic editor can only create one sheet.
Apart from these three limitiations the EAGLE Light Edition can do
anything the Professional Edition can do. You can even load, view and
print drawings that exceed these limits!
You can register your program copy for US$ 49.-/DM 98.- . Registered
users receive their own personalized license, a printed manual,
CD-ROM, full phone and fax support and may use EAGLE Light for
commercial projects.
I think this is a very good offer, so don't miss to get a copy!
You will find more information at:
http://www.cadsoft.de/freeware.htm
If you want to download the OS/2 Version go to
http://www.cadsoft.de/cgi-bin/download.pl?dir=pub/program
You will also find the key on this page.
----------------------------------------------------------------------
To subscribe, unsubscribe, or for more information on
WarpCast, visit: http://www.warpcast.com/
----------------------------------------------------------------------
WarpCast Archives - Courtesy of VOICE International